What is the easiest way to create a map file for a handheld Garmin Etrex 30 from a scanned paper map? This is a one off exercise.
↧
Map file from paper map
↧
cleanupm
I'm sorry but my post was not visible. That's why double post.
↧
↧
ANDROID Poi Icons are to big
Good morning,
All my poi icons are showing to big.
I want to have the icons some smaller at the overview in the navi.
How can I set that the icons shows smaller?
Regards
Rene
All my poi icons are showing to big.
I want to have the icons some smaller at the overview in the navi.
How can I set that the icons shows smaller?
Regards
Rene
↧
BMW Road Map North America NEXT 2018-2
BMW Road Map North America NEXT 2018-2
BMW Road Map North America NEXT 2018-2.txt
BMW Road Map North America NEXT 2018-2.txt
↧
Road Map North America MOVE 2019-1
Road Map North America MOVE 2019-1
Road Map North America MOVE 2019.txt
Road Map North America MOVE 2019.txt
↧
↧
Road Map North America ROUTE 2019-1
Road Map North America ROUTE 2019-1
Road Map North America ROUTE 2019-1.txt
Road Map North America ROUTE 2019-1.txt
↧
Road Map North America NEXT 2019-1
Road Map North America NEXT 2019-1
Road Map North America NEXT 2019-1.txt
Road Map North America NEXT 2019-1.txt
↧
nonsense posts
Works very fine with galaxs s8
thanks for work
link ist down
thanks for work
link ist down
↧
Updating a FOD SPORT Motorcycle SatNav - Turns out it is easy!
Greetings,
I have a Fod Sport motorcycle satnav that came from ebay - it works ok and has taken me across Europe a couple of times.
It came with iGO primo 9.6.13.405512 and the maps were dated Q4 2016.
I wanted to update the maps, but had no idea what I was doing so started searching.......
Nothing about updating Fod Sport anywhere.
Found this site and got more confused, kept reading and finally sorted it out. Thanks to everyone here.
I thought it was going to be difficult, but it is really quite simple - maybe this is why no-one has written about it.
Here is what I did - hope it helps someone else.
I downloaded 'igo8.3_maps_n_files_europe_HERE' from the maps section of this site and saved it onto the pc.
I turned the satnav on and went into the 'settings' menu from the start screen, clicked 'next' then changed the 'usb' option to 'mass storage'.
I then connected the satnav to the pc with the usb cable, and it showed up in 'My Computer' as an 8GB removable disk.
I copied everything, about 4GB, from this disk onto my pc as a backup.
I then deleted everything from within the 'Content/building', the 'Content/map', the 'Content/poi' , and 'Content/speedcam' folders.
The 'maps' folder contained .fbl files and .hnr files. The 'igo8.3_maps_n_files_europe_HERE' file contained .fbl and .hnr files, but it also contained .fda, .fds, .fjv, .fjw, .fpa, .fsp, .ftr files - I made sure to copy only the .fbl files and .hnr files in the next step.
I then opened the 'igo8.3_maps_n_files_europe_HERE' and copied the contents of the 'building', 'map', 'poi' and 'speedcam' folders onto the satnav.
There was no 'phoneme' folder on the satnav, so I left that alone.
Finally, I disconnected the satnav from the pc, switched it off and then back on again . . . . .
After a brief hesitation - nervous moment - everything booted up fine - which was nice.
It can still find a route from UK to Austria, so I guess it is working correctly.
The new maps show up in the 'Help', 'About' section, and there was no issue with licences or such like - So everything is good.
I have a Fod Sport motorcycle satnav that came from ebay - it works ok and has taken me across Europe a couple of times.
It came with iGO primo 9.6.13.405512 and the maps were dated Q4 2016.
I wanted to update the maps, but had no idea what I was doing so started searching.......
Nothing about updating Fod Sport anywhere.
Found this site and got more confused, kept reading and finally sorted it out. Thanks to everyone here.
I thought it was going to be difficult, but it is really quite simple - maybe this is why no-one has written about it.
Here is what I did - hope it helps someone else.
I downloaded 'igo8.3_maps_n_files_europe_HERE' from the maps section of this site and saved it onto the pc.
I turned the satnav on and went into the 'settings' menu from the start screen, clicked 'next' then changed the 'usb' option to 'mass storage'.
I then connected the satnav to the pc with the usb cable, and it showed up in 'My Computer' as an 8GB removable disk.
I copied everything, about 4GB, from this disk onto my pc as a backup.
I then deleted everything from within the 'Content/building', the 'Content/map', the 'Content/poi' , and 'Content/speedcam' folders.
The 'maps' folder contained .fbl files and .hnr files. The 'igo8.3_maps_n_files_europe_HERE' file contained .fbl and .hnr files, but it also contained .fda, .fds, .fjv, .fjw, .fpa, .fsp, .ftr files - I made sure to copy only the .fbl files and .hnr files in the next step.
I then opened the 'igo8.3_maps_n_files_europe_HERE' and copied the contents of the 'building', 'map', 'poi' and 'speedcam' folders onto the satnav.
There was no 'phoneme' folder on the satnav, so I left that alone.
Finally, I disconnected the satnav from the pc, switched it off and then back on again . . . . .
After a brief hesitation - nervous moment - everything booted up fine - which was nice.
It can still find a route from UK to Austria, so I guess it is working correctly.
The new maps show up in the 'Help', 'About' section, and there was no issue with licences or such like - So everything is good.
↧
↧
TORRENT - A2118270901 -COMAND APS NTG1 Europa 2018/2019 v19
TORRENT - A2118270901 -COMAND APS NTG1 Europa 2018/2019 v19
Download TXT and copy magnet link to Torrent-Client.
Rgds
Spoiler: TORRENT
Download TXT and copy magnet link to Torrent-Client.
Rgds
↧
disrespect and laziness
ich kann die geheime Inhalt nicht sehen.
What do I do with hidden content on your site?
What do I do with hidden content on your site?
↧
Chinese car navigation
Dear all,
not sure if I post in the right section. But I will try it.
I've bought some 7" gps 2DIN car navigation running on Android 4.4.4 KitKat and thanks to this forum I've successfully installed iGo and latest HERE maps. But the problem is following:
Whenever I run the GPS module (namely the iGo) the microphone is turned off. So when I have a call the other side cannot hear me. Once the GPS is turned off, the microphone miraculously revives and bluetooth is working.
Not sure if that is a problem with the navigation software (like it overrides some microphone settings - maybe some voice commands??) or it is android related. Just to mention I am not really experienced with Android OS but when searching the GUI there is no settings for microphone. It is some kind of lite version of KitKat.
Do you have an idea where the problem might be?
Thanks,
Antalies.
not sure if I post in the right section. But I will try it.
I've bought some 7" gps 2DIN car navigation running on Android 4.4.4 KitKat and thanks to this forum I've successfully installed iGo and latest HERE maps. But the problem is following:
Whenever I run the GPS module (namely the iGo) the microphone is turned off. So when I have a call the other side cannot hear me. Once the GPS is turned off, the microphone miraculously revives and bluetooth is working.
Not sure if that is a problem with the navigation software (like it overrides some microphone settings - maybe some voice commands??) or it is android related. Just to mention I am not really experienced with Android OS but when searching the GUI there is no settings for microphone. It is some kind of lite version of KitKat.
Do you have an idea where the problem might be?
Thanks,
Antalies.
↧
Looking for - Trakmaps TOPO QC v6.0.1
Hi guys,
Anyone has newest release from Trakmaps ?
Trakmaps TOPO Qc v6.0.1
Seems like there are a lot of improvements !
Looking forward to hear from you
Anyone has newest release from Trakmaps ?
Trakmaps TOPO Qc v6.0.1
Seems like there are a lot of improvements !
Looking forward to hear from you
↧
↧
cleanup B
Thanks...!!
↧
WIN CE I need the latest igo8 for WinCE 5
And need to know where exactly is the starting exe of the navigation program. Now i have copied data folder and cannot find the exe
thanks
thanks
↧
Radio Navigation System MFD
Hello everyone,
I recently bought a GOLF IV year 2001which has Radio navigation System MFD. I need CD with maps for east Europe. Any help please.
I recently bought a GOLF IV year 2001which has Radio navigation System MFD. I need CD with maps for east Europe. Any help please.
↧
WINCE Barometer issue with distttext
Hello,
I have an issue with an ux where I can't find a solution:
I'm want to use dt_ux_WinCE_08_Next_Maneuver_v6.0_THL_800_480 with my 1024x600 WinCE Igo Primo. But the distabnce shows an error "Unkonwn object type: DISTTEXT". The Baromter itself is working fine ...
Can someone help me here?
I have an issue with an ux where I can't find a solution:
I'm want to use dt_ux_WinCE_08_Next_Maneuver_v6.0_THL_800_480 with my 1024x600 WinCE Igo Primo. But the distabnce shows an error "Unkonwn object type: DISTTEXT". The Baromter itself is working fine ...
Can someone help me here?
↧
↧
Hellp with Garmin GUPDATE_patched.GCD
Hello,
After flashing the GUPDATE.GCD file, Do i have to rename the patched (GUPDATE_patched.GCD) to GUPDATE.GCD and keep a copy of it at Garmin device SYSTEM/GUPDATE.GCD or at sd/Garmin/GUPDATE.GCD .
Thanks.
After flashing the GUPDATE.GCD file, Do i have to rename the patched (GUPDATE_patched.GCD) to GUPDATE.GCD and keep a copy of it at Garmin device SYSTEM/GUPDATE.GCD or at sd/Garmin/GUPDATE.GCD .
Thanks.
↧
Blaupunkt Portland 310/Igo Primo
I have a Blaupunkt Portland 310 Nav unit that came with Igo Primo software on sd card. Sd card no longer works. i have a new 4gb card and software but cant get it to operate. I've tried changing exe. name and map folder names to diffent things that were suggested for other blaupunkt unit, still wont work. Does anyone have experience or ideas on this unit?
↧
ANDROID SEARCH notification_recalculate_route and CityName_24 alternative for igo primo
hi, i prefer igo primo rather then nextgen but i miss the nextgen´s ux : "notification_recalculate_route" and some ux that show the name of the city where i am, for example "CityName_24".
i use igo primo 9.6.29.636868 with the skin diMka aP.133 Mod Nk´s.
is there something like this or a method to modify a nextgen ux into a primo one?
kind regards, jason
i use igo primo 9.6.29.636868 with the skin diMka aP.133 Mod Nk´s.
is there something like this or a method to modify a nextgen ux into a primo one?
kind regards, jason
↧