SatCatcher v1.4
![DdBaocA]( "DdBaocA")
Spoiler: Description
Requirements: 2.3 and up
Overview:
Setting a parable has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install without the need to call a specialist.
Setting a parable has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install without the need to call a specialist.
SatCatcher is an application that allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite into space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...).
SatCatcher also uses GPS to show your location on a map and shows the direction of the satellite from your position.
The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass.
The accelerometer is used to verify that the holder of your antenna is vertical.
The antenna adjustment steps:
1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation.
2- View satellite actually increased with your camera and make sure there are no obstacles and validate the location of your antenna.
3. Check that the support of your antenna is vertical.
4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna)
5. Set the elevation
6- Search guidance through visual and sound assistant
7- Filter settings.
For the proper functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and GPS from your smartphone.
tips:
- If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Zoom in for more detail.
- The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help set benchmarks with the direction on the map from your location. It also allows you to calculate the orientation. It will do more than use a manual compass for orientation.
- Do not hesitate to recalibrate the compass and avoid too close to the parable of the arm because it is sensitive to metallic elements. Try to place your smartphone or the there is less magnetic interference
Overview:
Setting a parable has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install without the need to call a specialist.
Setting a parable has always been a complicated task, especially if you do not have a clue. That is why I posted this application that will simplify this task and allow you to install without the need to call a specialist.
SatCatcher is an application that allows you to orient your antenna to any satellite. Using augmented reality, this application displays the target satellite into space to better choose the location of your antenna and ensure the absence of any obstacle (wall, tree ...).
SatCatcher also uses GPS to show your location on a map and shows the direction of the satellite from your position.
The compass accompanied by a beep lets you orient your antenna following the acceleration of beeps or the arrow of the compass.
The accelerometer is used to verify that the holder of your antenna is vertical.
The antenna adjustment steps:
1- choose a satellite and authorize geolocation to determine the direction of the antenna orientation.
2- View satellite actually increased with your camera and make sure there are no obstacles and validate the location of your antenna.
3. Check that the support of your antenna is vertical.
4. Calculate the polarization and adjust the rotation of the LNB (the head of your antenna)
5. Set the elevation
6- Search guidance through visual and sound assistant
7- Filter settings.
For the proper functioning of the application, SatCatcher will need the camera, compass, gyroscope, accelerometer and GPS from your smartphone.
tips:
- If your smartphone does not have GPS, you can manually move the "marker" on the card until it points your exact location. Zoom in for more detail.
- The compass is very important to adjust your dish, but if your smartphone does not have one, you can still use the application. In this case, it will help set benchmarks with the direction on the map from your location. It also allows you to calculate the orientation. It will do more than use a manual compass for orientation.
- Do not hesitate to recalibrate the compass and avoid too close to the parable of the arm because it is sensitive to metallic elements. Try to place your smartphone or the there is less magnetic interference
Code:
https://play.google.com/store/apps/details?id=com.InfoSoftyContact.SatCatcher
Spoiler: Link